Filter
Top Products
26
Browser
Edit profile
You can activate and configure
WAP profiles stored in yours phone.
To activate a WAP profile, select
Browser > WAP > Settings >
Edit profile to choose a profile in
the Select profile list. Then press
Activate profile
.
To configure a WAP profile
manually, select Browser > WAP >
Settings > Edit profile and choose
a profile from the Select profile list.
Then enter details for the following
parameters.
► Rename: Edit the profile name.
► Homepage: Edit the profile
address.
► Data account: Select an account
type from GSM data or GPRS
.
► Connection: Select WAP to set
up IP address and Security
.
Select HTTP to set up Proxy
address and Proxy port
.
► Username: Edit your username
to access the profile.
► Password: Edit your password
to access the profile.
Browser
Settings
GPRS (General Packet Radio
Service) is a technology that use for
sending and receiving data over the
mobile network. The applications
that use GPRS are WAP services,
SMS and MMS messaging and
GPRS dial-up (such as Internet and
e-mail). You can set the phone to
automatically register to a GPRS
network when you switch the phone
on.
If your service provider assigns the
WAP profiles and configures the
settings for you, you can use the
GPRS or GSM immediately. If you
want to configure the WAP settings
manually, you have to contact your
network operator or service provider
for appropriate settings.
Note
In most cases, you only need to use
one of the default profiles to access
the Internet. The settings are different
from operator to operator. Please
consult your operator or service
provider for the correct settings and
proceed with care. Improper settings
will cause the connection to fail.