Filter
Top Products
31
GETTING STARTED
To perform a hard reset
• Press and hold both
buttons(Send+Volume Down) shown
enclosed by circles in the picture
below. Keep these keys pressed, and
at the same time, press the POWER
button on the right side of your
device. And hold both buttons for a
while (about 10 seconds).
Calibrate the
Device
Calibrating the device screen involves
tapping with the stylus the center of
a cross as it moves around the screen.
This process ensures that when you
tap the screen with your stylus, the
tapped item is activated.
If your device does not accurately
respond to screen taps, follow these
steps to re-calibrate it:
1. Tap
Start > Settings > System tab
> Screen.
2. On the
General tab, tap Align
Screen, and follow the instructions
on the screen.
KS20_Open_India_0128_깽.indd 31 2008.2.11 3:0:58 PM