Filter
Top Products
Settings
88
PIN code request (Menu 7.7.2)
You can activate a PIN (Personal Identification
Number). You can check the current status of
configuration from the status bar.
PIN request and release procedures
1. Select ‘PIN Code Request’ item from the list, and
press [Select]. Then a window allowing you to
select ‘On’ or ‘Off’ appears.
- Select ‘On’/‘Off’ from the list, press [Select], and
input the current PIN code to set the PIN
request. If ‘PIN Code Request’ is already
enabled/disabled, an “Already activated”/
“Already cancelled” message will be displayed.
2. 3 incorrect PIN code entries in the PIN code input
window would invalidate the PIN code. In this case,
you have to input the PUK (PIN Unblock Key)
code to configure the PIN code again.
3. The maximum allowed number of attempts of PUK
input is 10 times. ATTENTION: after having
entered 10 times an incorrect PUK code, the SIM
card will be blocked and must be replaced.
Press the C key in the PIN code input window to
return to the previous step.
Call barring (Menu 7.7.3)
Call barring menus for All calls, Video, Voice are
provided.
However, available menus are determined by the SIM
supporting CPHS.
The menu consists of All calls, Video, Voice. The All
calls menu provides menus to barring all calls and the
Video menu provides menus to barring video calls.
the Voice menu provides menus to barring voice calls.
Settings
Item Description
Enable PIN Request You have to input the PIN code each time
the mobile phone is turned on.
Disable PIN Request You do not have to input the PIN code
when the mobile phone is turned on.
Note
]
If the PIN code request cannot be disabled by
operator settings, you will not be able to
choose this menu item.