Filter
Top Products
emoción
94
3. Access Points
- User can list the available Access Points by
selecting “List” appears on Centre soft menu of
“Access point” parameter from Internet setting
value.
- User can add a new Access Point by selecting
“Add New” from “Option” menu.
- Press “Done” key to save any configuration
changes. The details for Access Point
parameters are as follows:
emoción
Connection title Access Point profile name.
Bearer Choose the bearer from the list. (Default
is “UMTS/GPRS”)
Authentication Choose the authentication from the list.
(Default is “No auth”)
User name Information provided by Service Provider.
Password Information provided by Service Provider.
APN APN name to access network. Information
provided by service provider.
Traffic class Choose the Traffic Class from the list.
(Default is "Subscribed")
Req. max UL bitrate Choose the Maximum Uplink Bitrate from
the list. (Default is "Subscribed")
Req. max DL bitrate Choose the Maximum Downlink Bitrate
from the list. (Default is "Subscribed")
Reliability class Choose the Reliability class from the list.
(Default is "Subscribed")
DNS server Choose the DNS server from the list.
(Default is "Automatic")
Dial-up number Required in case of Bearer is
"UMTS/GPRS/CSD" or "CSD". Information
provided by Service Provider.
Baud rate Required in case of Bearer is
"UMTS/GPRS/CSD" or "CSD" Choose the
value from select list. (Default is "9600")
Call type Required in case of Bearer is
"UMTS/GPRS/CSD" or "CSD" Choose Call
type from the list. (Default is "ISDN")
CSD username Required in case of Bearer is
"UMTS/GPRS/CSD" or "CSD" Information
provided by Service Provider.
CSD password Required in case of Bearer is
"UMTS/GPRS/CSD" or "CSD" Information
provided by Service Provider.