Filter
Top Products
3-1
NEC MH150/MH160 Mobile Handset Administration Guide - Revision 2
3
NEC MH150/MH160 Wireless
Handset Configuration
Each handset may be configured for site-specific requirements by
opening the Admin menu and selecting options or entering specific
information. Any settings entered in the Admin menu must conform to
system settings. Only the handset being configured is affected by the
Admin menu settings.
The mobile handset user may select several usability options from the
Standby menu, described in
“User-Defined Preferences” on page 3-20.
This information is also provided in the end-user manual.
When WPA2 Enterprise security is used, PAC files for EAP-FAST can be
provisioned wirelessly or by using the HAT. For PEAP, the HAT must be
used to enroll certificates. See WPA2 Enterprise PEAP Certificate
Enrollment and PAC Provisioning at the end of this chapter.
Other settings that must be configured include, but are not limited to,
WLAN QoS, DSCP tagging, DHCP and regulatory domain information. If
these are not selected by the administrator the handset will use the
default settings.
The NEC Mobile Handset Administration Tool is a software utility that
enables rapid configuration of handsets by utilizing the USB port on the
Dual Charger. See the NEC MH150/MH160 Mobile Handset
Administration Tool document for specific instructions. Please see your
service representative or contact NEC customer service for more
information about this time-saving tool.