NEC MH150 Cell Phone User Manual


 
Using the MH150/MH160 Mobile Handset 7-9
NEC MH150/MH160 Mobile Handset Administration Guide - Revision 2
Handset Operation
If you want to… Then…
Turn the handset on Press and hold the END key until two chirps sound.
Turn the handset off
Press and hold the END key. One chirp will sound. If you are in a call, hang up
first, then turn off the handset.
Unlock the keypad Press the Unlk softkey, then #.
Lock the keypad While in Standby mode, press the Cfg softkey, then press NavOK.
Place a call
1. To dial a number, follow any one of these sequences
Press the START key, wait for a dial tone, then dial the number.
Dial the number and then press the START key or NavOK.
Press the Spkr softkey, then dial the number.
Press the START key; press the Favr softkey; use the Nav ▲▼ keys to
select the number or user from the list; press NavOK to dial the number.
2. Listen for the ring to indicate the alerting of the called party.
Note: Line 1 is the default line.
Place a call from Favorites
menu
1. Press START or Spkr.
2. Listen for dial tone.
3. Press the FAVR softkey.
4. Use the Nav keys to navigate to the desired entry.
5. Select the entry by pressing NavOK.
6. Press START or NavOK to place the call.
Place a second call
The handset supports one active call per line. To place a second call while the
first call is on Hold, the handset must have multiple line appearances.
1. To get a dial tone for the second call, press LINE + [different line number].
2. Press the number key for the line, or press NavOK. The first call is
automatically placed on hold and the second call appears in a new active call
tab.
3. Dial the number to place the second call.
4. Use the Nav ◄► keys to toggle between calls. Press NavOK or Rtv to
resume the call on the active call tab.
Place a call on a different line
1. Press the LINE key.
2. Navigate to the desired line and press NavOK or press the number key for
the line.
3. Dial the number.
Answer a call
Use the Nav keys to display the tab of the inbound call displaying a flashing
phone icon. Do one of the following:
Press START, and hold the handset to your ear.
Press the Answ softkey and hold the handset to your ear.
Press the Spkr softkey and speak towards the handset.