Filter
Top Products
7-4 Using the MH150/MH160 Mobile Handset
NEC MH150/MH160 Mobile Handset Administration Guide - Revision 2
>>
Cursor forward Entering a dial number. Move the cursor forward in alphanumeric
mode, if the cursor is at the end of the line, adds
a space character.
Answ
Answer Incoming call on the selected line.
Answer the call (equivalent to START key).
Bksp
Backspace
character
Entering a dial number. Delete the character prior to the cursor position.
Back
Back one screen Displaying a menu.
Exit the menu.
Dial
Dial Call A dial number is being entered on the selected
line.
Initiate a phone call to the entered dial number.
End
End Call An active call on the selected line.
Terminate the call without going back to
standby mode.
Favr
Favorites Prior to entering the first character of a dial
number
Activate the Favorites menu.
Hld
Hold In an active call. Place the call on hold. The line status shows
when the call is on hold or when audio
is flowing.
Msg
Message Initial dial screen when new line is selected and
a dial tone is active prior to entering first
character of the number to be dialed.
Note: Appears only if the
PROXYn_MAIL_NOTIFY is configured.
A message center contact address must
be defined for the proxy used by the
selected line.
Initiate a call to the specified message center
contact address for retrieval or administration
of voicemail.
Mute
Toggle muting In an active call. Toggle audio transmission to the far end. The
line status
shows
when not muted or
when muted.
OK
OK Power up registration if username is not
configured in admin menu.
Send the username and password to the SIP
server for authorization to register the handset.
Redl
Redial Prior to entering the first character of a dial
numb
er.
Redial the last number that was predialed.
Note: Redial of last overlapped dialed number
is not supported.
Rtv
Retrieve In an active call and you have placed the call on
hold or in standby mode if any call is on hold.
Resume a call that was previously placed on
hold or that went on hold when another line was
activated.
Save
Save Entering a dial number as a forward
destination
.
Save the dial number as the forwarding
destination for the selected line.
Symb
Symbols Entering a username or password.
Entering the digits of a number.
Select the set of symbols available on the
keypad while entering data.
Softkey Name Displayed during… Press to…