Filter
Top Products
7-14 Using the MH150/MH160 Mobile Handset
NEC MH150/MH160 Mobile Handset Administration Guide - Revision 2
Open the speed dial list from
standby
Press the Spdl softkey from standby mode.
View the system speed dial
number
If the system speed dial key has been programmed, it will be listed as the first
entry with a close bracket (>) as the first character. It is assigned to number 1.
Only the system administrator may change this entry.
Make a speed dial call
1. From standby or while in the speed dial menu, press and hold the
corresponding number key on the keypad for one second. The system speed
dial key must be pressed for three seconds.
2. The handset will display the name and number for one second before the call
is dialed. Y
ou may press END during this second to terminate the call. (You
may also use the Nav keys to highlight an entry and then press START or the
Spkr softkey to dial the number.)
If you do not place a call, you may return to standby by pressing the Exit softkey.
If you want to… Then…