NEC MH150 Cell Phone User Manual


 
11-2 Software Maintenance
NEC MH150/MH160 Mobile Handset Administration Guide - Revision 2
When the update is complete, the handset displays the extension
number, and is ready for use.
Download Failure or Recovery Messages
Table 11-2 lists display messages that indicate a failure or recovery
situation during the download process.
Table 11-2 Download failure or recovery messages during download
Message Description
Server Busy
Handset is attempting to download from a TFTP server that is busy
downloading other phones and refusing additional downloads. The handset
will automatically retry the download every few seconds.
TFTP Error (X): yy
A failure has occurred during the TFTP download of one of the files. (x) =
The file number which was being downloaded; yy is an error code describing
the particular failure. Possible error codes are:
01 = TFTP server did not find the requested file.
02 = Access violation (reported from TFTP server).
07 = TFTP server reported “No such user” error
. Check the TFTP server
configuration.
16 = No TFTP server address. Check the TFTP server configuration.
81 = File put into memory did not CRC. The handset will attempt to download
the file a
gain.
FF = Timeout error. TFTP server did not respond within
a specified period of
time.
Erase Failed
Download process failed to erase the memory in the handset. This operation
will retry.
Waiting
Handset has attempted some operation several times and failed, and is now
waiting for a period of time before attempting that operation again.
Updating Code
Handset is downloading new software into memory. The number icons at the
bottom of the display indicate which file number is currently being
downloaded. This message also displays a progress bar. When the progress
bar fills the display line the update operation is complete on that file.
Message Description