Nokia 3586 Cell Phone User Manual


 
62 Copyright © 2004 Nokia. All rights reserved.
Advanced features
Once the touch tone string is stored with
the phone number, you can now call the
number and have the touch tone strings
sent automatically.
LINK PHONE BOOK
ENTRIES
This feature allows you to store a phone
number in one phone book location and
link it to another phone book entry.
For example, linking the phone number of
an automated service (example:
automated banking service) with a touch
tone string entry in your phone book
(example: account and PIN numbers)
automatically recalls and sends the touch
tone string when you call the service.
USE LINKING OPTIONS
1 Store the touch tone string into your
phone book.
2 Assign the phone book entry with the
touch tones to a 1-touch dialing
location (example: location 3). For
more information on 1-touch dialing,
see “1-touch dialing” on page 59.
3 Edit the automated service’s phone
number by adding +n to the end of the
phone number (where n is the 1-touch
dialing location).
Example: 214-555-1234+3
4 Press OK to save your changes.
5 Dial the automated service’s number
from your phone book. Your phone
automatically sends the touch tones
when the call connects.
Important: You may need to
enter a pause (p) before the + in
order to account for delays in the
automated system answering
your call (example: 214-555-
1234p+3).
LEARN ABOUT VOICE
RECORDER
Recorder allows you record audio memos
and store them in your phone. Use this
feature to record things like phone
numbers and personal memos.
Total time available for all memos is one
minute (up to 60 seconds).
The maximum number and length of
remaining memos depends on how much
memory is still available. A countdown
timer is displayed while recording and
shows remaining record time.
Record a memo
1 Press Menu 8-3-1 (Voice > Voice
recorder > Record).
2 After the tone, begin recording your
memo.
3 When you finish recording, press Stop.
4 Enter the subject of the voice memo,
then press OK.
NOTES
Pressing Back instead of entering a
subject discards the memo without
saving.
Pressing OK without entering a
subject assigns the default name
(Recording) to the memo.