Filter
Top Products
64 Copyright © 2004 Nokia. All rights reserved.
Security and System settings
12 Security and System settings
Warning! Do not switch on the
phone when wireless phone use is
prohibited or when it may cause
interference or danger.
Your phone has a variety of security
features that help prevent some of the
following:
• Placing accidental or unintentional
calls.
• Unauthorized use of your phone.
• Placing and accepting calls from
certain phone numbers
• Accidental erasing of information or
restoring factory settings.
• LOCK KEYPAD (KEYGUARD)
With keypad lock (Keyguard) you can
temporarily lock your phone’s keypad and
prevent the accidental placing of calls or
pressing of the keypad (for example,
when the phone is in your pocket or in
your purse).
Activate/deactivate Keyguard
Press Menu followed by */+ (within three
seconds) to activate Keyguard. It is
possible to answer a call, even though
Keyguard is activated. Press the Send key
to answer the call. When the call has
ended, the keypad remains locked.
Important: appears at the
top of the display. The left
softkey is also labeled Unlock.
UNLOCK KEYPAD
Press Unlock followed by */+ (within
three seconds) to deactivate Keyguard
and unlock your phone’s keypad.
Important: When the phone is
locked, calls may be possible to
the emergency number
programmed into your phone (for
example, 911 or other official
emergency number).
•SECURITY CODE
Your phone prompts you for a five-digit
security code for certain features and
commands. Access is granted only after
the correct security code has been
entered successfully.
Your phone’s default security code is
12345. It’s recommended that you
change this code at once, write it down,
and store it in a safe place away from
your phone.
Important: When entering your
security code, ***** is
displayed on the screen to keep
others from viewing your code.
Correct entry errors
You can delete the last entered digit by
pressing Clear (or by pressing and holding
Clear to delete all the digits more quickly).
Enter the correct code or press Back to
exit. If you enter an incorrect security