Filter
Top Products
65
To enable a positioning method, select Positioning methods, scroll to the positioning
method, and select Options > Enable. To stop using it, select Options > Disable.
To define the positioning server access point, select Positioning server > Access point and
the desired access point. Then select Server address, and enter the domain name or URL
address of the server.
Phone
Select Menu > Settings > Phone sett. > Phone and Call, Call forwarding, Call restriction,
or Network.
Call
Send my caller ID (network service)—to set your phone number to be displayed (Yes) or hidden
(No) from the person whom you are calling. The value may be set by your service provider
when you subscribe to the service (Set by network).
Call waiting (network service)—to set the network to notify you of a new incoming call while
you have a call in progress. To request the network to activate call waiting, select Activate.
To request the network to deactivate call waiting, select Cancel. To check whether the
function is active, select Check status.
Reject call with SMS—to enable rejecting phone calls with a text message. See ”Answer or
reject a call,” p. 23.
Message text—to enter a text to be sent when you reject a call with a text message
Automatic redial—to set the phone to make a maximum of 10 attempts to connect the call
after an unsuccessful call attempt. Press the end key to stop automatic redialing.
Show call duration—to set the phone to display the call duration during a call
Summary after call—to set the phone to briefly display the approximate duration of the
last call
1-touch dialing > On—to set the phone to dial the numbers assigned to the 1-touch dialing
keys, 2 to 9, by pressing and holding the corresponding number key
Anykey answer > On—to answer an incoming call by briefly pressing any key, except the left
and right selection keys, volume keys, the power key and the end key.
Line in use (network service)—shown only if the SIM card supports two subscriber numbers,
that is, two phone lines. Select which phone line (Line 1 or Line 2) you want to use for
making calls and sending short messages.
Calls on both lines can be answered irrespective of the selected line. You cannot make calls
if you select Line 2 and have not subscribed to this network service. To prevent line selection,
select Line change > Disable if supported by your SIM card. To change this setting, you need
the PIN2 code.