Filter
Top Products
66
Call forwarding
Call forwarding is a network service.
1. Select which calls you want to forward: Voice calls, Data calls, or Fax calls.
2. Select the desired option. For example, to forward voice calls when your number is busy
or when you reject an incoming call, select If busy.
3. To set the forwarding option on or off, select Options > Activate or Cancel. To check
whether the option is activated, select Check status. Several forwarding options can be
active at the same time.
Call restriction and call forwarding cannot be active at the same time.
Call restriction
Call restriction (network service) allows you to restrict the calls that you make and receive
with your phone. To change the settings, you need the restriction password from your
service provider.
Scroll to the desired restriction option, and to request the network to set call restriction on,
select Options > Activate. To set the selected call restriction off, select Cancel. To check
whether the calls are restricted, select Check status. To change the restriction password,
select Edit restriction passwd.. To cancel all active call restrictions, select Cancel all restrict.
Call restriction and call forwarding cannot be active at the same time.
When calls are restricted, calls may be possible to certain official emergency numbers.
Network
Operator selection—To set the phone to search for and select automatically one of the
available networks, select Automatic. To select the desired network manually from a list of
networks, select Manual. If the connection to the manually selected network is lost, the
phone sounds an error tone and asks you to select a network again. The selected network
must have a roaming agreement with your home network, that is, the operator whose SIM
card is in your phone.
Cell info display (network service)—To set the phone to indicate when it is used in a cellular
network based on microcellular network (MCN) technology and to activate cell info
reception, select On.
Connection
Select Menu > Settings > Phone sett. > Connection > Bluetooth, USB, Access points, Packet
data, Data call, SIP settings, or Configurations.
Bluetooth
Switch Bluetooth on or off, and edit Bluetooth settings. See ”Bluetooth connection,” p. 71.