Filter
Top Products
13
Insert a microSD card
Note that the memory card may be supplied
with the phone, and may already be inserted.
1. Open the side door (1).
2. Place the microSD card in the slot with
the golden contact area facing down (2).
Push the card gently to lock it into place.
3. Close the side door tight (3).
Remove a microSD card
1. Open the side door.
2. Push the card gently to release it. Remove memory card and press 'OK' is displayed.
Pull the card out, and select OK.
3. Close the side door tight.
■ Charge the battery
1. Connect the charger to the wall socket.
2. Open the side door (1), and connect the charger plug
to the charger connector in the phone (2).
3. After charging, close the side door tight.
If the battery is completely discharged, it may take a few
minutes before the charging indicator appears on the
display or before any calls can be made.
The charging time depends on the charger and the battery used. Charging a BP-5M battery
with the AC-4 charger takes approximately 80 minutes.
■ Switch the phone on and off
Press and hold the power key.
If the phone asks for a PIN code, enter the PIN code, and select OK.
If the phone asks for the lock code, enter the lock code, and select
OK. The factory setting for the lock code is 12345.
■ Set time and date
To set the correct time zone, time, and date, select the country
you are presently in, then enter the local time and date.