Filter
Top Products
25
Call functions
D
r
a f
t
Network
Select > Settings > Phone sett. > Phone > Network and from the following:
Network mode — to select which network to use (this is shown only if it is
supported by the service provider). If you select Dual mode, the device uses the
GSM or UMTS network automatically.
Operator selection — to set the device to search for and automatically select one
of the available networks, select Automatic. To select the desired network
manually from a list of networks, select Manual. The selected network must have
a roaming agreement with your home network.
Cell info display (network service) — to set the device to indicate when it is used in
a cellular network based on microcellular network (MCN) technology, and to
activate cell info reception
■ Video sharing
Use video sharing to send live video from your mobile device to another
compatible mobile device during a voice call.
Video sharing requirements
Video sharing requires a 3G universal mobile telecommunications system (UMTS)
connection. For information about network availability and the fees associated
with this application, contact your service provider.
To use video sharing you must do the following:
• Ensure that your device is set up for person-to-person connections.
• Ensure that both the sender and recipient are registered to the UMTS network.
• Ensure you have an active UMTS connection and you are within UMTS network
coverage. If you move away from a UMTS network during the sharing session,
the sharing session is discontinued, but your voice call continues.
Video sharing settings
A person-to-person connection is also known as a session initiation protocol (SIP)
connection. Before you can use video sharing, ask your service provider for the
configured SIP profile to be used in your device.
Select > Settings > Phone sett. > Connection > Video sharing and from the
following:
Video sharing — to select whether the video sharing is enabled
SIP profile — to select a SIP profile