Filter
Top Products
51
Media
D
r
a f
t
To update the selected podcast or marked podcasts, for a new episode, select
Options > Update.
To add a new podcast by entering the URL of the podcast, select Options > New
podcast. To edit the URL of a selected podcast, select Edit.
To update, delete, and send a group of selected podcasts at once, select Options >
Mark/Unmark, mark the podcasts, and select Options and the desired action.
To open the website of the podcast (network service), select Options > Open web
page.
Some podcasts provide the opportunity to interact with the creators by
commenting and voting. To connect to the internet to do this, select Options >
View comments.
■ Radio
To turn on the radio, select > Applications > Radio. To turn the radio off, select
Exit.
When you turn on the radio for the first time, a wizard helps you to save local
radio stations (network service).
For availability and costs of the visual service and station directory services,
contact your service provider.
The FM radio depends on an antenna other than the wireless device antenna. A compatible
headset or enhancement needs to be attached to the device for the FM radio to function
properly.
Warning: Listen to music at a moderate level. Continuous exposure to high volume
may damage your hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be extremely loud.
The radio supports Radio Data System (RDS) functionality. Radio stations
supporting RDS may display information, such as the name of the station. If
activated in the settings, RDS also attempts to scan for an alternative frequency
for the currently playing station, if the reception is weak. To set your device
automatically search for alternative frequencies, select Options > Settings >
Alternative frequencies > Auto scan on.
Tune and save a radio station
To start the station search when the radio is on, scroll up or down. To save the
station when a station is found, select Options > Save station. Select a location
for the station, enter the name for it, and select OK.