Filter
Top Products
Nokia 6820i User Guide 59 Copyright © 2004 Nokia
Contacts
4 When the voice tag has been successfully saved, Voice tag saved is displayed, a beep
sounds, and a symbol appears after the phone number with a voice tag.
To check the voice tags, select Menu > Contacts > Voice tags. Scroll to the contact, select
Options and the function you want.
Make a call using a voice tag
If the phone has an application using the GPRS connection that is sending or receiving data,
end the application to make a call by using voice dialing.
1 In the standby mode, press the Right selection key, or press and hold Names.
A short tone is heard, and Speak now is displayed.
2 Say the voice tag clearly.
The phone plays the recognized voice tag and dials the phone number of the voice tag
after 1.5 seconds.
If you are using a compatible headset, press and hold the headset key to start the voice dialing.
Info numbers and service numbers
Your service provider may have included information numbers or service on your SIM card.
Select Menu > Contacts > Info numbers or Service numbers. Scroll through a category to
an information number or to a service number, and press the Talk key to call the number.
• SAVE NUMBERS ON THE SIM CARD
The phone numbers assigned to your SIM card are saved in My numbers if this is allowed
by the card. To view the numbers select Menu > Contacts > My numbers. Scroll to the
desired name or number, and select View.
• CALLER GROUPS
You can arrange the names and phone numbers saved in Contacts into caller groups. For
each caller group, you can select a ringing tone and a logo that is shown on the display
when you receive a call from a phone number in the group. To set the phone to ring only
upon calls from phone numbers belonging to a selected caller group, see Alert for in “Tone
settings” on page 60.
Select Menu > Contacts > Caller groups and the desired caller group. You can
select from the following functions: Rename group, Group name, Group ringing tone,
Group logo, and Group members.
If you select Group members, select Add, to add a name to the group, if there are no names
in the group. Otherwise, select Options > Add contact.
To remove a name from a caller group, scroll to the desired name, and select Remove.