Filter
Top Products
Bluetooth is activated.
You have an active infrared connection. If the indicator blinks, your device is trying to connect to the other device, or the
connection has been lost.
Your device is connected to a PC with a data cable.
You have selected all your calls to be diverted to another number (network service).
and Indicates the phone line that you have selected in the Settings > Call settings > Line for outgoing calls menu, if you
have subscribed to two phone lines (network service).
The timed profile is active. You can modify the profile settings, such as the ringing tones, in Control panel. See "Profile
settings," p. 62.
You have missed a phone call.
You have an active alarm.
, , A headset, handsfree, or loopset is connected to the device.
A wireless LAN connection is active. If you have defined a background scan interval, is shown when a wireless LAN
network is available.
To define a background scan interval, go to Desk > Tools > Control panel > Connections > Wireless LAN > Settings.
A GPRS connection is active.
An EGPRS (EDGE) connection is active.
A data call is active.
IP passthrough is active.
Your device is synchronizing.
Keypad lock (Keyguard)
When the keypad lock is on, calls may be possible to the official emergency number programmed into your device.
Use the keypad lock (keyguard) to prevent the keys on the cover phone from being accidentally pressed.
To lock the keypad, press the center of the scroll key and .
To unlock the keypad, press the center of the scroll key and .
To lock the system, press the center of the scroll key and . Note that you have to define a lock code with which you can lock
and unlock the system.
To unlock the system, press the center of the scroll key and . Key in the lock code and press OK.
Volume control
Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not
hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.
To adjust the volume level during a call, press the scroll key left or right.
To adjust the volume level when using the loudspeaker, open Telephone, and scroll left or right with the joystick.
Memory cards
Note: Before you use a memory card from the Nokia 9210 Communicator sales package with your Nokia 9300i, you
must convert the memory card with Data mover and reinstall the applications that you previously installed to the
memory card. However, do not reinstall any pre-installed applications for the Nokia 9210 Communicator. Your Nokia
9300i contains a later version of these applications, and these later versions must be used with the Nokia 9300i.
Your Nokia device only supports the FAT16 file system for memory cards. If you use a memory card from another device or if
you want to ensure compatibility of the memory card with your Nokia device, you may need to format the memory card with
your Nokia device. However, note that all data in the memory card is permanently deleted if you format the memory card.
Inserting and removing a memory card
1. If you have a memory card, slide the memory card into the memory card slot (2). Make sure that the beveled corner of the
memory card is pointing towards the SIM card slot and the contact area is facing downwards. The back cover must be in
place for the device to recognize the memory card.
G e t t i n g s t a r t e d
Copyright © 2005 Nokia. All Rights Reserved. 14