Filter
Top Products
Set up video sharing
To set up video sharing, you need person-to-person and 3G connection settings.
A person-to-person connection is also known as a Session Initiation Protocol (SIP)
connection. The SIP profile settings must be configured in your device before you can
use video sharing. Contact your service provider for the SIP profile settings, and save
them to your device. Your service provider may send you the settings in a configuration
message or give you a list of the needed parameters.
Set up a person-to-person connection
1 Select Menu > Settings and Connectivity > Admin. settings > SIP settings and
a SIP profile.
2 Enter the needed SIP profile settings.
Edit video sharing settings
Select Menu > Settings and Connectivity > Video sharing.
Use a 3G connection
For details about networks, contact your service provider.
Add a SIP address to a contact
1 Select Menu > Contacts.
2 Select a contact or create a new contact.
3 Select Options > Edit.
4 Select Options > Add detail > Share video.
5 Enter the SIP address in the format username@domainname (you can use an IP
address instead of a domain name).
If you do not know the SIP address for the contact, you can use the phone number
of the recipient, including the country code, to share video (if supported by the
network service provider).
Share live or recorded video
During an active voice call, select Options > Share video.
1 To share live video, select Live video.
To share a video, select Video clip.
2 Select the desired SIP address or phone number that is stored in the contact card
for the recipient. If the SIP address or phone number is not available, manually enter
the details, and select OK. If entering a phone number, you need to enter the country
code. The invitation is sent to the SIP address.
If you access another application while sharing a video, the sharing is paused.
Telephone 47