Filter
Top Products
These resolutions are only available in the main
camera.
● Add to album — Select whether you want to
save the image to a certain album in Gallery. If
you select Yes, a list of available albums opens.
● Show captured image — Select On if you want
to see the captured image after it is taken or
Off if you want to continue taking pictures
immediately.
● Default image name — Define the default
name for the captured images.
● Extended digital zoom (main camera only)
— On (continuous) allows the zoom increments
to be smooth and continuous between digital
and extended digital zoom, On (paused) allows
the zoom increments to pause at the digital and
extended digital step point, and Off allows a
limited amount of zoom while retaining the
image resolution.
● Capture tone — Select the tone you want to
hear when you take a picture.
● Memory in use — Select where you want to
store your images.
● Rotate image — Select whether you want
images that are captured when the device is held
upright to be rotated when you open them in
Gallery.
● Restore camera settings — Select Yes to return
the default values to the camera settings.
Setup settings—adjust colour and
lighting
To enable the camera to reproduce colours and
lighting more accurately or to add effects to your
pictures or videos, scroll through the active toolbar,
and select from the following options:
● Flash mode (
) (images only) — Select the
desired flash mode.
● Colour tone (
) — Select a colour effect from
the list.
● White balance (
) — Select the current
lighting condition from the list. This allows the
camera to reproduce colours more accurately.
● Exposure compensation (
) (images only) — If
you are shooting a dark subject against a very
light background, such as snow, adjust the
exposure to +1 or +2 to compensate the
background brightness. For light subjects
against a dark background, use -1 or -2.
● Sharpness (
) (images only) — Adjust the
sharpness of the image.
● Contrast (
) (images only) — Adjust the
difference between the lightest and darkest
parts of the image.
● Light sensitivity (
) (images only) — Increase
the light sensitivity in low light conditions to
decrease the risk of images that are too dark.
37
Camera