Filter
Top Products
connections set up, the recipient does not receive
invitations. You receive an error message that
indicates that the recipient cannot accept the
invitation.
Video sharing settings
To adjust video sharing settings, select Menu >
Tools > Settings and Connection > Video
sharing.
To set up video sharing, you need person-to-person
and UMTS connection settings.
Person-to-person connection settings
A person-to-person connection is also known as a
session initiation protocol (SIP) connection. The SIP
profile settings must be configured in your device
before you can use video sharing. Contact your
service provider for the SIP profile settings, and save
them to your device. Your service provider may send
you the settings or give you a list of the needed
parameters.
To add a SIP address to a contact:
1. Select Menu > Contacts.
2. Select the contact, or create a new contact.
3. Select Options > Edit.
4. Select Options > Add detail > Share video.
5. Enter the SIP address in the format
username@domainname (you can use an IP
address instead of a domain name).
If you do not know the SIP address for the
contact, you can use the phone number of the
recipient, including the country code, to share
video (if supported by the network service
provider).
UMTS connection settings
To set up your UMTS connection:
● Contact your service provider to establish an
agreement for you to use the UMTS network.
● Ensure that the UMTS access point connection
settings for your device are configured properly.
For more information about the settings, contact
your service provider.
Share live video or video clips
During an active voice call, select Options > Share
video.
1. To share live video during the call, select Live
video.
To share a video clip, select Video clip and the
clip you want to share.
You may need to convert the video clip into a
suitable format to be able to share it. If your
device notifies you that the video clip must be
129
Make calls