Nokia N8SILWHTULK Cell Phone User Manual


 
asked to select a connection method and to define
the settings needed.
To edit the settings of an access point, select one of
the access point groups, scroll to an access point,
and select Edit. Use the instructions provided by
your service provider to edit the following:
Connection name — Enter a name for the
connection.
Data bearer — Select the data connection type.
Depending on the data connection you select, only
certain setting fields are available. Fill in all fields
marked with Must be defined or with a red *. Other
fields can be left empty, unless your service provider
has instructed otherwise.
To use a data connection, your service provider
must support this feature, and if necessary, activate
it for your SIM card.
Create access point groups
Press , and select Tools > Settings >
Connection > Destinations.
Some applications allow you to use access point
groups to connect to a network.
To avoid selecting which access point to use every
time the device attempts to connect to a network,
you can create a group that contains various access
points, and define the order in which the access
points are used to connect to a network.
For example, you can add wireless LAN (WLAN) and
packet data access points to an internet access point
group and use the group for browsing the web. If
you give the WLAN access point the higher priority,
the device connects to the internet through a WLAN
if available and through a packet data connection if
not.
To create a new access point group, select
Options > Manage > New destination.
To add access points to an access point group, select
the group and Options > New access point. To
copy an existing access point from another group,
select the group, scroll to an existing access point,
and select Options > Organise > Copy to other
dest..
To change the priority order of access points within
a group, scroll to an access point, and select
Options > Organise > Change priority.
Packet data access points
Select Menu > Tools > Settings and
Connection > Destinations > Access point, and
follow the instructions on the display. Or, open one
of the access point groups, select an access point
marked with
, and select Edit.
Use the instructions provided by your service
provider to edit the following:
164
Settings