Filter
Top Products
To switch off the device, press the power key briefly,
and select Switch off!.
Charge the battery
Your battery has been partially charged at the
factory. There may not be a need to charge the
battery in advance. If the device indicates a low
charge, do the following:
Regular charging
1. Connect the charger to a wall
outlet.
2. Connect the charger to the
device. The charging indicator
light next to the USB connector
is lit when the battery is being
charged.
3. When the device indicates a
full charge, disconnect the
charger from the device, then
from the wall outlet.
You do not need to charge the
battery for a specific length of
time, and you can use the device while it is charging.
If the battery is completely discharged, it may take
several minutes before the charging indicator
appears on the display or before any calls can be
made.
Tip: Disconnect the charger from the wall
outlet when the charger is not in use. A
charger that is connected to the outlet
consumes power even when it is not
connected to the device.
USB charging
You can use USB charging when a wall outlet is not
available. With USB charging, you can also transfer
data while charging the device.
1. Connect a compatible USB device to your device
using a compatible USB cable.
The efficiency of USB charging varies
significantly. In some cases, it may take a very
long time for charging to start and the device to
start functioning.
2. If your device is switched on, you can select from
the available USB mode options on the display
of the device.
During extended operation such as an active video
call and high speed data connection, the device may
feel warm. In most cases, this condition is normal.
If you suspect the device is not working properly,
take it to the nearest authorised service facility.
18
Get started