Filter
Top Products
Connectivity
94
Copyright © 2005 Nokia. All rights reserved.
• Allow sync requests—Select Yes if you want to
allow the server to start a synchronization.
• Accept all sync reqs.—Select No if you want your
device to ask you before a synchronization
initialised by the server is started.
• Network authentic. (shown only if Data bearer is
set to Internet)—Select Yes to enter a network user
name and password. Scroll down to view the user
name and password fields.
3 Select Back to save the settings and return to the main
view.
Synchronise data
In the Sync main view, you can see the different
synchronization profiles and the kind of data to be
synchronized.
1 Select a synchronization profile and Options >
Synchronise. The status of the synchronization is
shown at the bottom of the screen.
To cancel synchronization before it finishes, select
Cancel.
2 You are notified when the synchronization is
complete. After synchronization is complete, select
Options > View log to open a log file showing the
synchronization status (Complete or Incomplete) and
how many calendar or contact entries, or notes have
been added, updated, deleted, or discarded (not
synchronized) in your device or on the server.
Device manager
Press , and select Connect. > Dev. mgr.. You may
receive server profiles and different configuration settings
from your network operator, service provider, or company
information management department. These configuration
settings may include access point settings for data
connections and other settings used by different
applications in your device.
To connect to a server and receive configuration settings
for your device, select Start configuration.
To allow or deny receiving of configuration settings from a
service provider, select Enable config. or Disable config..
Server profile settings
Contact your service provider for the correct settings.
Server name—Enter a name for the configuration server.
Server ID—Enter the unique ID to identify the
configuration server.
Server password—Enter a password to identify your device
to the server.