Copyright © 2000-2002 Nokia. All rights reserved.
138
Internet
Note: Charges may apply for certain types of received calls, such as roaming
and high speed data calls. Contact your GSM network operator for more
information.
Note: If you are not using HSCSD, the communicator expects the callback call
to use the same data call settings that were used in the callback-
requesting call. The network must support that type of call in both
directions, to and from the communicator.
Callback type: The options are Use server number/Use server number (IETF)/Use number
below. Ask your Internet service provider for the correct setting to use. The
setting depends on the service provider’s configuration.
Callback number: Type in your communicator’s data phone number which the dial
back server uses. Usually, this number is the data call phone number of
your communicator.
Other page
Figure 56
Allow plain text login: If you selectYes, the password at connection may be sent in
clear. The options are Yes/No. For optimum security, use option No. Some
Internet service providers require that this setting is Yes.