Filter
Top Products
Copyright © 2000-2003 Nokia. All rights reserved.
219
Extras
IMPORTANT: The default lock code is 12345. For security reasons, it is
imperative that you change the lock code. Keep the code secret and in a
safe place, separate from the communicator. Note that no passcode
system can guarantee absolute prevention of unauthorised access.
The codes are shown as asterisks. If you are changing a code, you will be prompted
for the current code and then the new code twice.
PIN code request: If you set the PIN code request On, the communicator requests
that you enter the code every time you turn on the phone. If you enter the
PIN code incorrectly three times in succession, you will need a PUK code
to unblock the SIM card. When the SIM card is blocked, you cannot send
or receive any documents or calls except calls to preprogrammed
emergency numbers. Otherwise, the communicator can be used normally.
You need the PIN code to change this setting.
Note: This setting cannot be changed, if the phone is switched off or if there is
no valid SIM card inserted.
Note: Some SIM cards do not allow you to turn the PIN code request off.
Autolock period: Determines the security time-out period, after which the
communicator will lock. The options are None/2 minutes/5 minutes/10
minutes. The last option allows you to define the number of minutes
yourself. When the communicator is locked, you can make emergency
calls to predefined numbers using the cover phone. You can also answer
incoming calls and make emergency calls using the Telephone
application. All other actions are blocked. The timer is reset by any input,
data transfer, printing, and so on. You need the lock code to change this
setting.