Filter
Top Products
Packet data
Select Menu > Tools > Settings > Connection > Packet data.
Your device supports packet data connections, such as GPRS in the GSM network. When you are using your device in GSM and
UMTS networks, it is possible to have multiple data connections active at the same time; access points can share a data
connection, and data connections remain active (for example, during voice calls). See "Connection manager," p. 49.
Packet data settings
The packet data settings affect all access points using a packet data connection.
Select from the following:
• Packet data conn. — Select When available to register the device to the packet data network when you switch the device on
in a supported network. Select When needed to establish a packet data connection only when an application or action requires
it.
• Access point — Enter the access point name provided by your service provider to use the device as a packet data modem to
your computer.
These settings affect all access points for packet data connections.
Net call settings
Select Menu > Tools > Settings > Connection > Internet tel. settings. Select Options > New profile or Options > Edit.
Scroll to Name, press the joystick, enter a name for the profile, and select OK.
Scroll to SIP profiles, press the joystick, select a profile and OK. SIP protocols are used for creating, modifying, and terminating
communications sessions such as net calls with one or more participants. SIP profiles include settings for these sessions.
To save your settings, press Back.
Session initiation protocol (SIP) settings
Select Menu > Tools > Settings > Connection > SIP settings.
Session initiation protocols (SIP) are used for creating, modifying, and terminating certain types of communication sessions
with one or more participants (network service). SIP profiles include settings for these sessions. The SIP profile used by default
for a communication session is underlined.
To create a SIP profile, select Options > Add new > Use default profile or Use an existing profile.
To edit a SIP profile, scroll to it, and press the joystick.
To select the SIP profile you want to use by default for communication sessions, scroll to the profile, and select Options > Default
profile.
To delete a SIP profile, scroll to it, and press the clear key.
Edit SIP profiles
Select Menu > Tools > Settings > Connection > SIP settings > Options > Add new or Edit.
Select from the following:
• Profile name — Enter a name for the SIP profile.
• Service profile — Select IETF or Nokia 3GPP.
• Default access point — Select the access point to use for the Internet connection.
• Public user name — Enter your user name received from your service provider.
• Use compression — Select if compression is used.
• Registration — Select the registration mode.
• Use security — Select if security negotiation is used.
• Proxy server — Enter the proxy server settings for this SIP profile.
• Registrar server — Enter the registration server settings for this SIP profile.
The settings available for editing may vary.
Edit SIP proxy servers
Select Menu > Tools > Settings > Connection > SIP settings > Options > Add new or Edit > Proxy server.
Proxy servers are intermediate servers between a browsing service and its users used by some service providers. These servers
may provide additional security and speed up access to the service.
Select from the following:
• Proxy server address — Enter the host name or IP address of the proxy server in use.
• Realm — Enter the proxy server realm.
• User name and Password — Enter your user name and password for the proxy server.
• Allow loose routing — Select if loose routing is allowed.
S e t t i n g s
Copyright © 2006 Nokia. All Rights Reserved. 73