Filter
Top Products
Settings
35
Copyright © 2004 Nokia. All rights reserved.
Call waiting (Network Service) - Select: Activate to request the network to activate call
waiting, Cancel to request the network to deactivate call waiting, or Check status to check
if the function is active or not.
Tip! To change the
settings for call diverting,
press and select
Tools→ Call divert. See
‘Diverting calls (Network
Service)’, p. 29.
Automatic redial - Select On and your game deck will make a maximum of ten attempts
to connect the call after an unsuccessful call attempt. Press to stop automatic
redialling.
Summary after call - Activate this setting if you want the game deck to briefly display the
approximate duration of the last call. To show costs, the Call cost limit needs to be
activated for your SIM card. See ‘Call costs (Network Service)’, p. 30.
Speed dialling - Select On and the numbers assigned to the speed dialling keys ( -
), can be dialled by pressing and holding the key. See also ‘Speed dialling a phone
number’, p. 27.
Anykey answer - Select On, and you can answer an incoming call by briefly pressing any
key, except , , and .
Tip! To switch
between the phone lines,
press and hold in
standby mode.
Line in use (Network Service) - This setting is shown only if the SIM card supports two
subscriber numbers, that is, two phone lines. Select which phone line you want to use for
making calls and sending text messages. Calls on both lines can be answered irrespective
of the selected line.
To prevent line selection, select Line change→ Disable if supported by your SIM card. To
change this setting, you need the PIN2 code.
Note: You will not be able to make calls if you select Line 2 and have not subscribed
to this network service.