Filter
Top Products
Settings
38
Copyright © 2004 Nokia. All rights reserved.
Access point name (for GPRS only) - The access point name is needed to establish a
connection to the GPRS network. You obtain the access point name from your network
operator or service provider.
Tip! See also
‘Settings needed for
multimedia messaging’, p.
58, ‘Settings needed for e-
mail’, p. 59, and ‘Basic
steps for accessing Web’,
p. 80.
Dial-up number (for GSM data and high speed data only) - The modem telephone number
of the access point.
User name - The user name may be needed to make a data connection, and is usually
provided by the service provider. The user name is often case-sensitive.
Prompt password - If you must key in a new password every time you log in to a server,
or if you do not want to save your password in the game deck, choose Yes.
Password - A password may be needed to make a data connection, and is usually provided
by the service provider. The password is often case-sensitive.
Glossary: ISDN
connections are a way to
establish a data call
between your game deck
and your access point.
ISDN connections are
digital from end to end
and as such offer quicker
set-up times and faster
data rates than analogue
connections.
Authentication - Normal / Secure.
Gateway IP address - The IP address that the required WAP gateway uses.
Homepage - Depending on what you are setting up, write either the web address, or the
address of the multimedia messaging centre.
Connection security - Choose whether or not Transport Layer Security (TLS) is used for the
connection.
Session mode - Permanent / Temporary.
Data call type (for GSM data and high speed data only) - Defines whether the game deck
uses an analogue or digital connection. This setting depends on both your GSM network
operator and Internet Service Provider (ISP), because some GSM networks do not support
certain types of ISDN connections. For details, contact your ISP.
Maximum data speed (for GSM data and high speed data only) - The options depend on
what you have chosen in Session mode and Data call type. Allows you to limit the
maximum connection speed when high speed data is used. Higher data rates may cost