Filter
Top Products
WAP 81
of your choice, then press
<
or
>
to select /
deselect it and press
,
to confirm.
All connection settings described below will apply to the
selected profile, which you can then rename for easier
identification.
Connection
Select connection
Allows you to select one of the data profiles you have
defined in
Settings
>
Access settings
(see page 43 for de-
tailed information on this subject).
In the list that appears, select the connection setting of
your choice and press
,
to confirm.
Bearer
Allows you to select the type of network used by the se-
lected profile when launching a connection.
GSM
or
GPRS
: your mobile will only use the GSM or
the GPRS network for WAP connections.
GPRS first
: your mobile will first try to connect to the
GPRS network, then to the GSM network if the GPRS
network isn’t available when connecting.
Selecting this option requires you to have configured
both GSM and GPRS settings. See page 43 for details.
Proxy address
Allows you to specify a proxy gateway address to be
used when launching a WAP connection using the se-
lected profile. Press
,
and enter the address of your
choice, then press
,
to confirm.
Press and hold
0
to enter a dot «.»
Proxy port
Allows you to specify a proxy port number, in case the
proxy you are using requires a different port number.
Press
,
and enter the number of your choice, then
press
,
to confirm.
Selecting
Never
will speed up the global downloading
time of the pages browsed.
Security
Certificates
Select this menu and press
,
to display the list of in-
stalled security certificates. Select one of the items in
the list and press
,
to display its details or delete it.
Session info
Allows you to display information about the current
WAP session: security type, class, etc. Press
c
to go
back one page.