Filter
Top Products
Getting started 13
Note
Handset may get warm during initial
charging. This is normal. The handset may
take a few seconds to power up.
3.3.1 Replacing your batteries
If there is a need to replace your
batteries, always use the recommended
battery type (see page 5).
Warning
Check the battery polarity when inserting
in the battery trail. Incorrect polarity may
damage the product.
Use the coin or screwdriver to turn
the battery cover screw in an
anticlockwise direction to unlock
the cover.
Pull open the battery trail.
Place the new rechargeable batteries
in the correct polarity as indicated
into the battery trail.
Close the trail and turn the battery
cover screw in a clockwise direction
to lock the cover.
Note
Please use a coin or screwdriver that is
the right shape and size for the screw that
is used. Otherwise you may damage the
screw when tightening it.
3.4 Checking the battery level
The battery icon displays the current
battery level.
Your handset may power down shortly if
it is not charged after the battery is
empty. If you are on the phone when the
battery is nearly empty, you will hear
warning tones. Place the handset on the
charger unit to recharge the batteries.
Otherwise, your call may be cut off
shortly after the warning.
3.5 Settings before first use
Before you first use your handset, you
will be asked to set the language, accept
an agreement and select the country
where the phone is to be used.
!
1
2
3
Battery full.
Battery is 2/3 full.
Battery is 1/3 full.
Battery is low. Require
charging.
4