Filter
Top Products
34
Chapter2
2.2 Signal bar
Signal bar indicates the strength of the received signals. It is represented with
6 levels. (GSM/WLAN) GSM at left side, WLAN at right side. At the bottom of
each signal bar, an icon marked with either G ( ) or W () indicates the
current active network. An active network is the network that the next outgoing
call will go through. It also means that the phone will smartly decide which
network should be “active” depending on the strength of the signal and the
preference of the network set by the user.
WLAN active GSM active
2.3 Mobile operator name and WLAN network
name
Operator and WLAN network name will both display in the idle mode when
user selects GSM preferred or WLAN preferred in Settings/Preferred network.
In WLAN preferred mode, the WLAN network name will be shown above the
GSM operator name. The “active” network will be shown in boldface.
In GSM preferred mode, the GSM operator name will be shown above the
WLAN network name. The “active” network will be shown in boldface.