Filter
Top Products
Chapter
77
8
WPA-PSK TKIP= WPA key setting
WPA2-PSK AES=.WPA2 key setting
2. Select WEP key 1/2/3/4, depth of the encryption, and input the key until it
is done.
3. Select WPA or WPA2 key for input.
4. Press Red key to end the WLAN settings. If all inputs are completed,
you will see the display of WLAN signal strength and “VoIP unregistered”
in the idle mode.
- IP address: IP address of the phone. To assign a static IP address turn
the DHCP off
You can choose the Automatic option to let the phone receive addressing from
the AP, or choose the Manual to set the IP address by hand.
Please refer to your Service Provider for further information.
Press Menu > WLAN > WLAN settings > Edit act. settings > IP settings >
Manual