Filter
Top Products
98
Chapter12
12.10 Security
Press OK key (Menu) > Scroll down key (two times) > Shift right key
(Settings) > OK key > Scroll up key (three times) (Security).
Enable PIN: you are required to enter the phone password when you switch
the phone on.
Change PIN: This feature allows you to change your current PIN to a new one,
provided that the PIN Check feature is enabled. You must enter the current
PIN before you can specify a new one. Once you have entered a new PIN, you
are asked to confirm it by entering it again.
Change PIN2: The Change PIN2 feature allows you to change your current
PIN2 to a new one. You must enter the current PIN2 before you can specify a
new one. Once you have entered a new PIN2, you are asked to confirm it by
entering it again.
Handset code: When the Phone Lock feature is enabled, the phone is locked
and you must enter the 4-digit phone password each time the phone is
switched on. The password is factory set to 0000. To change the phone
password, once the correct password has been entered, you can use the
phone until you switch it off.
Fixed dialing: To restrict your outgoing calls and text messages to selected
phone numbers if this function is supported by your SIM card. The PIN2 code
Information:
When security features that restrict calls are in use (call barring), calls may be
possible to certain emergency numbers in some networks (e.g. 112, 911 or
other official emergency numbers).
Information:
Not all SIM cards have a PIN2. If your SIM card does not, this menu option is
not displayed.