Filter
Top Products
Settings
150
Backlight Time
The setting lets you select the length of time the screen remains lit when
the phone is idle.
1. From the Idle screen, touch
Settings
Display and Light
Backlight Time.
2. Touch one of the backlight times to set the amount of time the phone’s
touchscreen remains lit without activity. Options include: 8 Seconds, 15
Seconds, 30 Seconds, 1 Minute, 3 Minutes and 10 Minutes.
3. Touch Save.
The phone can also be set to lock when the Backlight Time runs out (see
“Auto Keypad Lock” on page 153).
Note: Long light time will reduce operating time before battery recharging is necessary.
Time and Date
Use this menu to configure the settings for the time and date display.
1. From the Idle screen, touch
Settings
Time and Date.
2. Change settings as required (see below).
3. To save changes, touch <Save>.
The following settings are available:
Time Zone Updating: Lets you specify how the time zone information is
updated Manual Only, Prompt First or Automatic).
If Manual Only or Prompt First is selected, the following options are
enabled:
•
Time Zone
: Lets you specify your location relative to Greenwich Mean
Time. Using your fingertip, drag the map left or right until your location is
visible. Touch your location on the map then touch
OK
. To enable or