Filter
Top Products
Getting Started 8
Note:
As with any other radio-transmitting device, do not touch the antenna
(at the bottom of the device) while using your phone as this can affect
call quality and can cause the phone to operate at a higher power level
than is necessary.
2. If the phone functions are disabled, the “
Phone off
”
message and the No Service icon ( ) appear in the
display. To enable the phone functions, do the following:
•
Press and hold the
Quick
/Lock key ( ) at the lower right side of
your phone’s keypad. The
Quick List
menu appears in the display.
•
Select the
Wireless Manager
option. The
Wireless Manager
screen appears in the display. (For more information, refer to
“Wireless Manager”
on page 110.)
•
Select the
Phone
option. The Phone option setting switches from
Off
to
On
.
•
Press the
Done
soft key.
•
Press .
3. The phone begins searching for a network signal.
4. Once the phone finds a signal, the time, date, and day
appear in the Home screen in the display.
5. You’re now ready to place and receive calls.
Note:
If you are outside of your carrier’s coverage or roaming area, the “
No
Service
” message appears in the center of the phone’s display. If you
cannot place or receive calls, try later when service is available, or at
another location.
Setting Up Your Phone (Basic)
This process details use of
the
Getting Started
feature
on your phone. You can use
Getting Started
to
personalize your phone’s
appearance and ringtone,
and to setup some
functions of your i225 for
immediate use.
ᮣ
With the Home screen showing, press the
Start
soft key,
then select
Getting Started
( ). The following sub-
sections describe uses of the Getting Started options.
Set date and time
Provided you have service from your Wireless Carrier’s network,
this is done for you, automatically.
If the “
No Service
” message
is showing in the Home
screen, you can set the
time and date manually by
doing the following: