Filter
Top Products
Camera – Camcorder 72
Camera Screen Icons
Mode
— Indicates the camera is active.
Tip:
To change the Mode setting to Camcorder, press .
Shooting Mode
— Indicates the type of photo the
camera will take each time you press or the Camera
key ( ). Available Shooting Modes are: Single Shot
(shown), Multi Shot ( ), Mosaic Shot ( ), Funny
Mask ( ), and Smile Detection ( ). For more
information, refer to “Shooting Mode” on page 73.
Size
— Indicates camera’s current resolution setting.
Available Sizes are:
1600x1200
(shown),
1280x1024
(),
640x480
(), and
320x240
( ). See
“Camera Options” on page 73 for more information.
White Balance
— Indicates camera’s white balance
setting. You can change the camera white balance
setting. For more information, refer to “White Balance”
on page 74.
Effect
— Lets you change the color content of the
subject image to shades of a selected color. [Available
color effects are:
No Effect
(shown),
Black & White
(),
Sepia
( ), and
Negative
().]
Night Shot
— Lets you take photos in low light.
(Available values are
Off
() or
On
().
Settings
— Launches tabbed menus of options that
retain your settings until you change or reset them. For
more information, refer to “Settings” on page 75.
Default Memory
— Indicates where photos will be stored
[
My Device
(shown) or
SD Card
()].
Photo Limit
— Indicates the number of photos you can
take with the available memory. (Depending on the
Size
and
Default Memory
values.)
Zoom
— Enlarges the image from x
00
to x
05
before
you take a picture. For more information, refer to
“Zoom” on page 83.
Viewfinder Mode
— Indicates current viewfinder screen
format setting [Available options are no icons ( ), all
icons (shown), or crosshatch ( )].
Brightness
— Brightens ( ) or darkens ( ) the
image from
-2.0
to
+2.0
before you take a picture. For
more information, refer to “Brightness” on page 83.
Self Timer
— Delays the camera shutter
Off
(shown, 0
seconds) or for
2
(),
5
(), or
10
( ) seconds
after you press .