Filter
Top Products
microSD Card
Section 2J. microSD Card 103
Removing the microSD Card
1. Locate the microSD card slot on the right side of
the phone and flip up the plastic cover (1).
2. With the gold contact pins facing downward,
carefully insert the microSD card into the opening
and firmly push it in until you hear a click
indicating the card is securely installed (2).
3. Replace the plastic cover over the microSD slot on
the phone.
4. Replace the cover by lining up the tabs and then
firmly pressing the cover down until it snaps into
place. Check that the battery is still properly
installed before turning on the phone.
Replacing the microSD Card
1. Repeat steps 1 - 3 from “Removing the microSD
Card” on page 103.
2. Firmly press the card into the slot and release (it
should pop partially out of the slot.
3. Remove the card from the slot.
4. Replace the cover by lining up the tabs and then
firmly pressing the cover down until it snaps into
place. Check that the battery is still properly
installed before turning on the phone.
Note
Be sure to use only recommended microSD cards
(up to 16GB). Using non-recommended microSD
cards could cause data loss and damage your
phone.
Sprint M630.book Page 103 Thursday, January 8, 2009 10:33 AM