Filter
Top Products
12 2A. Phone Basics
Removing the Battery
1. Make sure the power is off so that you don’t lose any stored
numbers or messages.
2. To open, insert a fingernail into the slot ( ), and apply light
pressure while sliding the cover down ( ).
3. Lift the battery up and remove it from the phone ( ).
Charging the Battery
Keeping track of your battery’s charge is important. If your battery
level becomes too low, your phone automatically turns off, and
you will lose any information you were just working on.
Always use a Kyocera-approved desktop charger, travel charger,
or vehicle power adapter to charge your battery.
1. Plug the phone charger into an electrical outlet.
2. Plug the other end of the phone charger into the micro-USB
connector located on the upper left side of your phone.
With the Kyocera-approved Li-Ion battery, you can recharge the
battery before it becomes completely run down.
Navigating Through the Menus
The navigation key on your phone lets you scroll through menus
quickly and easily. Many menus feature a scroll bar on the right to
help you keep track of your position in the menu.
To navigate through a menu, press the navigation key up or down.
For a diagram of your phone’s menu, please see “Your Phone’s
Menu” on page i.
WARNING
Do not handle a damaged or leaking Li-Ion battery
as you can be burned.