Sanyo PLS-3810 Cell Phone User Manual


 
40 2B. Settings
Repeat the procedure above with each change from Off to On.
Also, while set to
On, a user will be required to enter the current
code to access the Parental Controls menu.
Changing the Parental Control Code
1. Press > Settings > Parental Controls >
Change Parental Control Code.
2. Enter your new code, and then press CONTINUE (left
softkey).
3. Re-enter your new code, and then press SAVE (left softkey).
Restricting Voice Calls and Text Messages
1. Press > Settings > Parental Controls > Restriction.
2. Read the message and press CONTINUE (left softkey).
3. Select an option:
Voice Calls to restrict incoming and outgoing voice calls
except those placed to 911.
Text Messaging to restrict sending text messages except to
designated recipients.
4. Select On/Off > On. If you selected Voice Calls in step 3,
read the message and press
OK (left softkey).
5. Select Allowed Contacts > All Contacts or Choose Contacts
to allow voice calls and text messages to and from all
Contacts entries or selected Contacts entries.
If you select Choose Contacts, select <Add Contact>, and
then choose a member from the list. If you want to remove
a member from the list, highlight the member and press
REMOVE (left softkey).
Restricting Web, Camera, and Location Mode
1. Press > Settings > Parental Controls > Restriction.
2. Read the message and press CONTINUE (left softkey).
3. Select an option:
Web to prevent using the browser.
Camera to prevent using the camera.
Force Location On to prevent changing the Location setting
from
On to Off. (See “Location Settings” on page 34.)
4. Select On.
Note
If you selected On in step 4, you cannot add, edit, and
delete any Contacts or Group entries.