Smart Technologies 8084i-G4-SMP Cell Phone User Manual


 
C H A P T E R 1
Welcome
5 smarttech.com/kb/170446
For information on cleaning the screen, see Cleaning the screen on page 48.
Cameras and reflective tape channel
In the corners of the screen, there arecameras that track finger and penpositions across the screen.
The screen is bordered by a channel that contains reflective tape.
For information on cleaning the camera windows and reflective tape, see Cleaning the screen on
page 48.
C A U T I ON
l Keep the reflective tape dry.
l Do not remove or damage the reflective tape.
I M P OR T A N T
l Do not attach items such as adhesive notes to the screen because they will interfere with the
cameras.
l Do not place anything in the channel because it will interfere with the cameras.
Presence detection sensors
The interactive flat panel has two presence detection sensors on its frame that can detect people up
to 16' (5 m) away when the interactive flat panel is in Standby mode.
When the sensors detect motion in the room, the interactive flat panel turns on and displays a
welcome screen. Touching the screen activates the interactive flat panel. When the sensors no
longer detect people in the room, the interactive flat panel returns to Standby mode.
N OT E S
l For information on cleaning your sensors, see Cleaning the presence detection sensors on
page 48.
l Presence detection settings can be changed with the on-screen display menu.
l If ECO Standby mode is enabled for SMARTBoard 8070i-G4-SMP interactive flat panels,
presence detection functionality is limited.
l For more information on the on-screen display menu settings relevant for presence detection,
see page 70 for SMARTBoard 8070i-G4-SMP interactive flat panels or page 78 for
SMARTBoard 8084i-G4-SMP interactive flat panels.