Filter
Top Products
C H A P T E R 5
Usingyour interactiveflatpanel
31 smarttech.com/kb/170446
Turning on and turning off SMARTBoard 8084i-G4-SMP
interactiveflatpanels
To turn on your interactive flat panel
1. Turn on your computer.
2.
Press the Power/Standby button on the front control panel.
OR
Press the POWER button or the MONITORON button on the remote control.
Your computer’s logon screen or desktop appears on your interactive flat panel.
I M P OR T A N T
If the power light on the front control panel is off, either the interactive flat panel is not plugged
in or the main power switch on the back of the interactive flat panel is turned off. To find the
main power switch, see Connector panels on page 18.
To turn off your interactive flat panel
1. Turn off your computer.
2.
Press the Power/Standby button on the front control panel.
OR
Press the POWER button or the MONITOROFF button on the remote control.
Using presence detection
Your interactive flat panel has two
presence detection sensors on its frame
that can detect people up to 16' (5 m)
away when the interactive flat panel is in
Standby mode.
When the sensors detect motion in the
room, the interactive flat panel turns on
and displays a welcome screen.
Touching the screen activates the
interactive flat panel. When the sensors
no longer detect people in the room, the interactive flat panel returns to Standby mode.