Filter
Top Products
In Sweep Multi Angle mode, the camera takes several images at different angles as you sweep across
the scene. These images are saved together in an MPO (Multiple Picture Object) file.
Sweep Panorama
Use this setting to take wide-angle, panoramic photos. Just press the camera key and move the
camera steadily from one side to the other.
Focus mode
The focus function controls which part of a photo should be sharp. When continuous autofocus is on, the
camera keeps adjusting focus so the area within the white focus frame stays sharp.
Single auto focus
The camera automatically focuses on the selected subject. Continuous autofocus is on. Touch and
hold the camera screen, the white focus frame turns green when the focus is set. The photo is taken
when you release you finger.
Multi auto focus
The focus is automatically set on several areas of the image. Touch and hold the camera screen, the
white focus frame turns green when the focus is set. The photo is taken when you release you finger.
Continuous autofocus is off.
Face detection
The camera automatically detects up to five human faces, indicated by frames on the camera screen.
The camera automatically focuses on the nearest face. You can also select which face to focus on by
tapping it on the screen. Touch and hold the camera screen, the white focus frame turns green when
the focus is set. The photo is taken when you release you finger. Face detection cannot be used for all
scene types. Continuous autofocus is on.
Infinity
Use when taking photos from a distance. Focus is set on subjects far away. Subjects close to the
camera may be blurred. Continuous autofocus is off.
Touch focus
Touch a specific area on the camera screen to set the area of focus. Continuous autofocus is off.
Touch and hold the camera screen, the white focus frame turns green when the focus is set. The
photo is taken when you release you finger.
This setting is only available in Normal capturing mode.
Exposure value
Determine the amount of light in the photo you want to take. A higher value indicates an increased
amount of light.
This setting is only available in Normal capturing mode.
Metering
This function automatically determines a well-balanced exposure by measuring the amount of light striking
the image you want to capture.
Centre
Adjust the exposure to the centre of the image.
Average
Calculate the exposure based on the amount of light striking the whole image.
Spot
Adjust the exposure in a very small part of image you want to capture.
This setting is only available in Normal capturing mode.
White balance
The white balance setting adjusts the colour balance according to the lighting conditions.
Auto
Adjust the colour balance automatically to the lighting conditions.
102
This is an Internet version of this publication. © Print only for private use.