Filter
Top Products
To take a photo in a Sweep Multi Angle mode
1
Activate the 3D camera.
2
Tap the icon on the top left of the screen, then select Sweep Multi Angle.
3
Press the camera key halfway down to lock the focus.
4
Press the camera key fully down, then pan the camera from left to right in a steady
horizontal movement.
To take a photo in Sweep Panorama mode
1
Activate the 3D camera.
2
Tap the icon on the top left of the screen, then select Sweep Panorama.
3
Tap and select the direction in which to pan.
4
Press the camera key halfway to lock the focus and exposure.
5
Press the camera key fully down, then pan the camera steadily in the direction of
the moving arrow.
Tips for taking Sweep Panorama photos (2D)
Note these limitations when you take Sweep Panorama photos:
•
If you cannot pan the phone across the entire subject within the given time, a grey area
occurs in the composite image. If this happens, move the camera faster to record a full
panorama image.
•
Since several images are stitched together, the stitched part does not always record
smoothly.
•
Under low light conditions, panorama images can be blurred or of low quality.
•
Under lights that flicker, such as fluorescent lights, the brightness or colour of the
combined images may not be consistent.
•
Sweep Panorama mode is not suitable for the following situations: when subjects are
moving or are too close to the camera; when target images offer little contrast, such as
photos of skies, sand beaches, or lawns; and when images change constantly, such as
waves or waterfalls.
•
The camera can cancel shooting in the following situations: you pan the camera too
quickly; you shake the camera too much; you pan the camera in the reverse direction.
111
This is an Internet version of this publication. © Print only for private use.