Filter
Top Products
Extras Menu
Operations
85
GB
Analog signal recording
1 Insert the “MagicGate Memory Stick” into the phone (see
page 17).
2 Connect the phone to the AC adaptor and the power plug
to mains (see page 15).
3 Connect the LINE IN (OPTICAL) jack on the phone to the
line output jacks or headphone jack on the audio device
using the commercially available line cable (stereo mini-
plug y 2-pin plug) or the supplied analog audio cable.
Line cable
(commercially
available)
Stereo
mini-plug
To the line
output jacks
To the
headphone
jack
2-pin plug
To the LINE IN
(OPTICAL) jack
e.g.,
stereo system,
cassette deck,
not equipped
with the optical
digital output jack
Stereo
mini-plug
Stereo
mini-plug
Analog
audio cable
(supplied)
e.g.,
radio-cassette deck
not equipped with
the optical digital
output jack
AC adaptor
(supplied)
To the external
connector
To Mains
Notes
• As the maximum recording time of the “MagicGate Memory Stick” is 120 min.
(at 66kbps), please connect the AC adaptor to the phone when recording.
• You can only record the digital signal of 44.1 kHz sampling frequency.
• The analog signal recording may not be performed due to an incomplete
connection depending on the line cables which are commercially available.
However, the recording performance is confirmed using the following cable.
• Stereo mini-plug y 2-pin plug ––––––– SonyRK-G136+PC-63S