Filter
Top Products
Appendix A Installing BlackBerry Connect 35
the Sony Ericsson Update Service at
www.sonyericsson.com
• A BlackBerry Internet Service enabled SIM card
from your service provider.
• If BlackBerry is not installed, you will need a
BlackBerry Connect setup file (.sis).
You can transfer the .sis file to your phone in many
ways. For example with your phone browser from
www.sonyericsson.com, or via email or Bluetooth,
or you can download the .sis file with your PC and
then transfer it to your phone. If you use your PC to
transfer the file to your phone you need:
– An Intel 486 compatible PC or better that can
run Windows 2000, or Windows XP.
– A USB port with 1.1 compatibility or greater.
– Sony Ericsson PC Suite for Smartphones.
Setting up BlackBerry Internet Service
If BlackBerry Connect software is installed on your
phone but not provisioned go directly to step 6 on
page 35.
If you transfer the .sis file by other means than with your
PC and USB cable go directly to step 4 on page 35.
Note: If you want to install the .sis file from your PC,
make sure that Sony Ericsson PC Suite for Smartphones
is installed on your PC. You can download the latest
version from: www.sonyericsson.com
Installing BlackBerry Connect software
1. Connect your phone to the PC via the USB cable.
The connection icon in the status area to the right of
the taskbar on your PC changes colour to show the
state of the connection:
when the icon is red there is no connection.
when the icon is amber the phone is connecting.
when the icon is blue the phone is connected.
Note: It is recommended that you backup your phone
before installing BlackBerry Connect software. To
backup: right click on the status area and select
Backup Manager.
2. Double click the BlackBerry Connect Setup file
(.sis) on your PC.
3. The
Application Installer dialog opens on your PC.
Click
Next to transfer the BlackBerry Connect
application from the PC to the internal memory of
your phone.
4. The
Install software dialog opens on your phone.
Select Install to continue.
5. When the installation is complete, select
Yes to start
the BlackBerry setup.
Provisioning BlackBerry Internet Service
6. If BlackBerry setup is not automatically started,
select from Standby
Main menu > Tools >
BlackBerry > More > Set up account
to start
BlackBerry setup.