Filter
Top Products
Using your Sony Ericsson P800/P900 with the Logitech wireless hub
• Check that the PC Suite software for your Sony Ericsson P800/P900 and the
Bluetooth Serial Port service are set up to use the same COM Port. To check
PC Suite, right-click the Phone Connection Link icon,
, in the
Windows
Taskbar and select Properties. In the Link Properties dialog
displayed make sure that there is a check mark against the same COM Port
as that used by the Bluetooth Serial Port service. (See the troubleshooting tip
How do I check the COM port my Bluetooth Serial Port service is using? for
details of how to check the Bluetooth Properties dialog.)
• Check that the HotSync
(taskbar icon ) and Microsoft
ActiveSync
(taskbar icon
) services are not running on your computer.
To stop the HotSync
service right-click the icon in the Windows
Taskbar
and uncheck the Local Service option.
To stop the Microsoft
ActiveSync
service right-click the Microsoft
ActiveSync
icon in the Windows
Taskbar and select Connection
Settings. Uncheck the Allow serial cable or infrared connection to this
COM port box.
• Finally, if none of the above works, try switching your mobile phone off and
back on again.
• When a computer's audio gateway/headset service is connected,
synchronization / sending file may not be successful.
If you think that the synchronization is taking too long, bear in mind that the first
time you synchronize your Sony Ericsson P800/P900 with your computer it can
typically take up to fifteen minutes. Subsequent synchronizations take much less
time.
How do I check the COM port my Bluetooth Serial Port
service is using?
From the My Bluetooth Places window do the following:
1. Click My Device if you are using Windows
2000, or View My Bluetooth
services if you are using Windows
XP.
2. Right-click My Bluetooth Serial Port and select Properties.
The General tab of the Bluetooth Properties dialog shows the COM Port
the Bluetooth Serial Port service is using.
© 2003 Logitech, Inc.
28