EPSON Imaging Technology Center Page: 25
Revision: 1 10/6/00
6.5 Set absolute horizontal print position “ESC $ nL nH”
Format:
ASCII ESC $ nL nH
Hex 1B 24 nL nH
Decimal 27 36 nL nH
Range of Values for Parameters: 0
≤
nL
≤
255
0
≤
nH
≤
127
Function:
1) The printing position in the X direction is set to a position spaced in the positive
direction by (256 x nH + nL) x (absolute horizontal position setting units) inches from the
origin (the left margin position) on the X axis of the position management coordinate
system.
2) If the left margin position + (256 x nH + nL) x (absolute horizontal position
setting units) is past the right margin position, then this command is ignored.
Initial State: -
Related Commands:
Commands related in the direction of applying an effect (Setting)
None
Commands related in the direction of receiving an effect (Setting)
None
Commands related in the direction of applying an effect (Operation)
None
Commands related in the direction of receiving an effect (Operation)
Set the absolute horizontal units with the ESC (U command.
Reset the absolute horizontal position units with the ESC @ and ESC (G
commands.
Return to the initial state using the ESC @ command.
