EPSON Imaging Technology Center Page: 48
Revision: 1 10/6/00
6.24 Set resolution of Raster image “ESC (D nL nH rL rH v h”
Format:
ASCII ESC ( D nL nH rL rH v h
Hex 1B 28 44 nL nH rL rH v h
Decimal 27 40 68 nL nH rL rH v h
Range of Values for Parameters:
nL=04H, nH=00H
0 <= v <= 127
0 <= h <=127
Function:
1) Set resolution of raster image ( ESC i ).
Vertical resolution : v / ( rH*256 + rL ) inch
Horizontal resolution : h / ( rH*256 + rL ) inch
2) Available resolution is
1/120, 1/180, 1/360, 1/720, 1/1440 inch
3) Following parameters are supported.
4)
0.
Case of microweave mode off
Mode ESC ( D ESC i Comment
(V x H) v / r h / r mH*256+
mL
120x120 12/144
0
12/144
0
48 expanded to 120x360 by the printer
120x360 12/144
0
4/1440 47/48
180x180 8/1440 8/1440 1/8/24 *1
180x360 8/1440 4/1440 1/8/24 *1
360x360 4/1440 4/1440 1/8/24 *1
1.
Case of microweave mode on
Mode ESC ( D ESC i Comment
(V x H) v / r h / r mH*256+
mL
360x360 4/1440 4/1440 1
*1 The parameter (mH*256+mL)=1 is recommended.
Initial State: -
Related Commands:
Commands related in the direction of applying an effect (Setting)
The Resolution set of Raster image exert the influence on the processing by the
ESC i command .
