A SERVICE OF

logo

EPSON Imaging Technology Center Page: 37
Revision: 1 10/6/00
6.16 Select MicroWeave print mode “ESC (i”
Format:
ASCII ESC ( i 01H 00H n
Hex 1B 28 63 01 00 n
Decimal 27 40 105 1 0 n
Range of Values for Parameters:
n=00H, 01H, 30H, 31H
Function:
1) Selects / deselects the MicroWeave mode.
n=0 or 30H: deselects
n=1 or 31H: selects
Initial State:
Non-MicroWeave mode
Related Commands:
Commands related in the direction of applying an effect (Setting)
Changes the non-selected state set by the ESC (G command.
Changes the non-selected state set by the ESC @ command.
Commands related in the direction of receiving an effect (Setting)
The ESC (G command sets the non-selected state.
The ESC @ command sets the non-selected state.
Commands related in the direction of applying an effect (Operation)
None
Commands related in the direction of receiving an effect (Operation)
None